Olympus IR-500 User Manual
Page 113
113
Ch
ap
ter 5:
P
layi
n
g
/E
d
it
in
g
imag
es
Choosing a starting frame for movie playback (INDEX PLAY)
3
Turn the mode dial to
q, then turn on the camera.
4
Turn on the TV and set the TV to the video input to which the cradle is
connected.
For information on how to set the TV’s video input, refer to your TV’s instruction manual.
Choosing a starting frame for movie
playback (INDEX PLAY)
You can display the movie in time frames so that you can select the frame from which you want
to begin movie playback.
1
Turn the mode dial to
q.
Tips
• The camera’s monitor goes off while the AV cable is connected to the camera.
• For information on your TV audio/video input jacks, refer to your TV’s instruction manual.
• Make sure that the camera’s video output signal type is the same as the TV’s video signal type. For details,
see “Selecting the video signal type (VIDEO OUT)” (
• If you hold the cradle upside down with the camera mounted, the camera may fall out of the cradle.
• Do not pick up only the camera when the camera is set on the cradle.
Tip
Index play can be set during movie playback or while the movie is paused.
OPEN
QUICK
VIEW
OPEN
POWER
OK
Mode dial
9 button
abcd buttons
p button
00E Adam .book Page 113 Tuesday, November 9, 2004 3:24 PM