Olympus IR-500 - Manual (Page 154)

154
Ch
ap
ter 7:
Cu
sto
m
iz
in
g
yo
u
r camera
Changing the sleep timer duration (SLEEP)
2
Press
a/c to select “SLEEP.”
Press
d to enter the sleep timer settings.
3
Press
a/c to select the length of time before the camera enters sleep
mode.
4
Press 9.
The selected sleep timer duration is set and the screen returns to the setup menu.
Tips
• To restore power from sleep mode, press any button of the camera. The mode before the camera enters
sleep mode resumes. If you restore power by turning the mode dial, the camera enters the mode you select.
• When running the slide show with the battery as a power source, the camera automatically stops the slide
show and enters sleep mode (standby mode) after 30 minutes.
• The camera does not enter sleep mode while the power is supplied to the camera through the AC adapter.
When the camera is in clock mode, however, it enters sleep mode after 10 minutes.
1MIN
3MIN
30SEC
5MIN
10MIN
SCREEN
CUSTOM BUTTON
ALL RESET
SLEEP
00E Adam .book Page 154 Tuesday, November 9, 2004 3:24 PM