Olympus IR-500 - Manual (Page 170)

170
Ch
ap
ter 7:
Cu
sto
m
iz
in
g
yo
u
r camera
Selecting the video signal type (VIDEO OUT)
Selecting the video signal type (VIDEO
OUT)
Select NTSC or PAL according to your TV video signal type. When you use the camera with a
TV overseas, set the correct video signal type in accordance with the local system before
connecting to the TV. If an incorrect video signal type is set, the output images will not appear
properly.
1
Turn the mode dial to q.
The setup menu appears.
2
Press
a/c to select “VIDEO OUT.”
Press
d to enter the video signal type setting.
3
Press
a/c to select “NTSC” or “PAL.”
4
Press 9.
The video signal type is set and the screen returns to the setup menu.
Tip
When you use the camera with a TV overseas, check the video signal of the local system before connecting to
the TV.
NTSC: North America, Japan, Taiwan, Korea
PAL: European countries, China
OPEN
QUICK VIEW
OPEN
POWER
OK
Mode dial
9 button
abcd buttons
VIDEO OUT
MODE RESET
NTSC
PAL
00E Adam .book Page 170 Tuesday, November 9, 2004 3:24 PM