When connected to a computer or printer – Olympus IR-500 User Manual
Page 235
235
If a problem arises
Ch
ap
ter 10:
O
th
ers
When connected to a computer or printer
Possible cause
Corrective action
Ref.
page
( The camera is not recognized by the computer.
The USB driver has not been installed.
It is necessary to install the USB driver
for Windows 98/98SE.
The camera’s power is off.
Open the multi-swing display or press
the power switch to turn on the camera.
The camera is not set to connect with
the computer.
Select “PC” in the “PC / PRINTER”
screen.
( The camera is not recognized by the printer.
The camera is set to connect with the
computer.
Select “PRINT” or “SEL. PRINT” in
the “PC / PRINTER” screen.
The camera or printer is not turned on.
Turn on the camera and printer.
Your printer is not compatible with the
PictBridge or Dock&Done system.
Refer to the instruction manual of your
printer, or consult the printer’s
manufacturer.
—
( Images cannot be stored onto the Dock&Done-compatible storage unit.
The storage setting is set to “NOT
STORE.”
Set the storage setting to “STORE.”
When a card containing images taken
with another camera is inserted, the
storage setting may be automatically set
to “NOT STORE.”
00E Adam .book Page 235 Tuesday, November 9, 2004 3:24 PM