Olympus IR-500 User Manual
Page 158
158
Ch
ap
ter 7:
Cu
sto
m
iz
in
g
yo
u
r camera
Erasing the image data automatically after storing them onto the storage
unit (ERASE STORED IMAGE)
2
Press
a/c to select “ERASE STORED IMAGE.”
3
Press
d to enter the “ERASE STORED IMAGE” settings.
Press
a/c to select “ON.”
4
Press
9.
The “ERASE STORED IMAGE” function is enabled and the screen returns to the setup
menu.
Note
If you set “ERASE STORED IMAGE” to “ON,” even the images set to “NOT STORE” on the card will also
be erased after the images are stored onto the Dock&Done-compatible storage unit. For information on the
settings for a Dock&Done-compatible storage unit, see “Setting images to store on a QDock&Done-
compatible storage unit (STORE)” (
If you set “ERASE STORED IMAGE” to “ON,” the following images are not erased:
- images registered on the albums,
- images with DPOF print reservations,
- images with the “
0” (protect) setting set to “ON,” and
- images which have failed to be stored to the Dock&Done-compatible storage unit.
1
1
OFF
ON
ON
ERASE STORED IMAGE
SHUTTER SOUND
BEEP
REC VIEW
ERASE STORED IMAGE
SHUTTER SOUND
BEEP
REC VIEW
OFF
ON
00E Adam .book Page 158 Tuesday, November 9, 2004 3:24 PM