Olympus SP-570 UZ - Manual (Page 19)

EN
19
Button operati
o
ns
• When [IMAGE STABILIZER] is set to [ON], continuous movie recording for a long period will
cause the camera’s internal temperature to rise and the camera may stop operation
automatically. Remove the battery and allow the camera to cool down for some time before you
begin shooting again. Or you can set [IMAGE STABILIZER] to [OFF].
In addition, the temperature of the camera’s exterior also rises during usage. This is not a
malfunction.
The last picture taken is displayed.
• Press the arrow pad to view other pictures.
• Use the control dial to switch between close-up playback, index display and calendar display.
g “Control dial Index display/Calendar display/Close-up playback” (P.22)
Playing back movies
Select a movie in the playback mode and press o to play.
Operations during movie playback
• Press o to pause the playback.
This icon lights red during movie recording.
The remaining recording time is displayed.
When the remaining recording time reaches 0, recording will stop
automatically.
q Viewing pictures you have taken/Selecting playback mode
00:34 00:34
REC REC
2008.08.26 2008.08.26 12:30 12:30
100-0004 100-0004
4 4 IN MOVIE PLAY OK
2008.08.26 2008.08.26 12:30 12:30
100-0004 100-0004
00:12 /00:34 00:12 /00:34 IN
1 : Increases the volume.
2 : Reduces the volume.
3 : Each time you press the button, the playback speed changes in the following
order: 2Ч; 20Ч; and back to 1×.
4 : Plays the movie in reverse. Each time you press the button, the playback speed
changes in the following order: 1Ч; 2Ч; 20Ч; and back to 1×.
Playing time/Total recording time
d4364_e_00_unified_bookfile.book Page 19 Friday, December 28, 2007 4:06 PM