Olympus SP-570 UZ - Manual (Page 31)

EN
31
Operations using the control panel
Using the control panel
(Example) To set [w]
1 Press
o to display the control panel on the monitor. The
cursor lights in the function area.
2 Use the arrow pad to select [w] and then use the control dial
to change the settings.
• Items which cannot be selected are displayed in gray.
• Items which cannot be set are indicated by [–].
Setting using the buttons
When 4 &, 1 z, 2Y or f is pressed, the corresponding
icon on the control panel is selected. While its icon is selected,
you can use the control dial to set the function’s value.
Switching My Mode
You can use this function when the mode dial is set to r. Use
the arrow pad to select r and use the control dial to switch My
Mode.
g “MY MODE SETUP Setting and saving shooting-related
functions” (P.57)
10 M
+2.0 1/400 F3.5
+0
+0
+0
44
ISO
1600
+2.0
P
w w
K
F INE
The flash intensity value and flash
intensity control indicator are
displayed.
10 M
1/400 F3.5
+0
+0
+0
44
ISO
1600
+0.0
P
2008.08.26 2008.08.26
K
When 4 & is pressed
10 M
1/400 F3.5
+0
+0
+0
44
ISO
1600
+0.0
F INE
r1/2/3/4 r1/2/3/4
c
K
Select this icon.
d4364_e_00_unified_bookfile.book Page 31 Friday, December 28, 2007 4:06 PM