Olympus SP-570 UZ - Manual (Page 44)

44
EN
Menu operations
• This function may not work effectively with some shooting conditions or subjects.
SHARPNESS ........................................................... Adjusting the sharpness of the image
1 (Toward +) : The image contours are emphasized,
making the image appear sharper. If
you adjust the sharpness too far toward
+, noise may become conspicuous in
the picture.
2 (Toward –) : The image contours are softened.
CONTRAST ................................................................ Adjusting the contrast of the image
1 (Toward +) : The light and dark areas are defined
more clearly, making the image look
crisper.
2 (Toward –) : The light and dark areas become less
defined, giving the image a softer
impression.
SATURATION ........................................................... Adjusting the saturation of the image
1 (Toward +) : Colors become stronger.
2 (Toward –) : Colors become weaker.
NOISE REDUCT. .............................................. Reducing the noise during long exposures
OFF Noise is not reduced. Noise may be conspicuous at slow shutter speeds.
ON Noise is reduced. Shooting time takes twice as long as usual. Shooting
is not available during noise reduction. Noise reduction can only be used
when the shutter speed is slower than 1/2 sec.
MENU
CAMERA MENU
BACK SET OK
PICTURE MODE
SHARPNESS
CONTRAST
SATURATION
NOISE REDUCT.
1
2
3
4
5
SHARPNESS
±0
MENU
CAMERA MENU
BACK SET OK
PICTURE MODE
SHARPNESS
CONTRAST
SATURATION
NOISE REDUCT.
1
2
3
4
5
CONTRAST
±0
MENU
CAMERA MENU
BACK SET OK
PICTURE MODE
SHARPNESS
CONTRAST
SATURATION
NOISE REDUCT.
1
2
3
4
5
SATURATION
±0
d4364_e_00_unified_bookfile.book Page 44 Friday, December 28, 2007 4:06 PM