Olympus SP-590UZ - Manual (Page 13)

13 EN
Using the flash
The fl ash functions can be selected to best
match the shooting conditions and render the
desired image.
1
Press the
# button to flip up the
built-in flash.
# button
The fl ash settings cannot be adjusted with
the fl ash closed.
To turn off the fl ash
Press the fl ash down back into the camera.
This sets to
$ (FLASH OFF) mode.
2
Press
:.
P
OK
1/400 F3.5 1/400 F3.5
OK
AUTO ! # $ L N
AUTO
SET SET
FLASH AUTO FLASH AUTO
NR
Brightening the subject
against backlight
(SHADOW ADJ *1 )
The camera fi nds a person’s face that has been
darkened by backlight and makes it appear
brighter.
*1 Shadow adjustment technology
1
Press the
f button.
P $ $ OFF
OK OK
OFF ON
SET SET
SHADOW ADJ SHADOW ADJ
NR
2
Use
9: to select [ON], and press
the
o button to set.
3
Point the camera toward the
subject. Check the frame appearing
around the face detected by the
camera, and then press the shutter
button to take the picture.
For some subjects, the frame may not
appear or may take some time to appear.
[METERING] (p. 33) is automatically
fi xed to [ESP], and [AF MODE] (p. 34) is
automatically fi xed to [FACE DETECT].
[
i] is automatically switched to [j].
Also, in sequential shooting, this function
is applied only to the fi rst frame. [DRIVE]
(p. 32)
D4384_en_basic.indb 13 D4384_en_basic.indb 13 1/15/2009 4:23:47 PM 1/15/2009 4:23:47 PM