Olympus SP-590UZ - Manual (Page 16)

16 EN
Printing
2
Turn on the printer, and then
connect the printer and camera.
Open the connector cover in
the direction of the arrow.
USB cable
(supplied)
Multi-connector
OK PC / CUSTOM PRINT
EASY PRINT START
: button
3
Press
: to start printing.
4
To print another image, use
9:
to select an image, and press the
o button.
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
PRINT EXIT OK
Direct printing (PictBridge *1 )
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To fi nd out if your printer supports PictBridge,
refer to the printer’s instruction manual.
*1 PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
The printing modes, paper sizes and other
setting options that can be set with the
camera vary depending on the printer that
is used. For details, refer to the printer’s
instruction manual.
For details on the available paper types,
loading paper and installing ink cassettes,
refer to the printer’s instruction manual.
Printing at the printer’s
standard settings
[EASY PRINT]
1
Display the image to be printed on
the monitor.
“Viewing images” (p. 15)
Printing can also be started when the
camera is turned off. After performing
step 2, use
78 to select [EASY PRINT],
press the
o button. Use 9: to select an
image, press the
o button.
D4384_en_basic.indb 16 D4384_en_basic.indb 16 1/15/2009 4:23:49 PM 1/15/2009 4:23:49 PM