Olympus E-P2 - Manual (Page 108)

108
EN
Cust
o
m
izi
n
g
your
c
a
mer
a
7
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the
card with the images.
[AUTO] Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press
i to display the setting screen.
Z K UTILITY
PIXEL MAPPING
gP. 126
The pixel mapping feature allows the camera to simultaneously adjust the image pickup
device and image processing functions.
EXPOSURE SHIFT
You can adjust the default value for optimal exposure for each metering mode according to
your preference. This can be set in 1/6 EV increments ranging from -1.0 EV to +1.0 EV.
x
Notes
• The exposure compensation can be set from -3.0 EV to +3.0 EV. Setting [EXPOSURE
SHIFT] reduces the range of the direction in which the default value is adjusted.
• You cannot check the exposure shift value during shooting. To make normal adjustments to
the exposure, perform exposure compensation.
g“Exposure compensation” (P. 43)
f WARNING LEVEL
You can change the timing when f is displayed (lights up). Normally, there is no need to
change this.
g“LCD monitor (Shooting)” (P. 22)
x
Notes
• The battery check display is not a warning that the battery needs to be charged. When f
blinks, charge the battery.
LEVEL ADJUST
You can calibrate the level gauge.
[RESET] Resets to the factory default adjustment value.
[ADJUST] Sets the current camera position as the zero point.
x
Notes
• Set [ADJUST] only when the camera is secured in a horizontal position. If the camera is not
in a stable position, you may not be able to calibrate the level gauge as desired.