Olympus E-P2 - Manual (Page 37)

37
EN
1
Ex
pos
u
re
1
Exposure
The camera sets the optimum aperture value and shutter speed automatically according to
the subject brightness.
Set the mode dial to P.
• The shutter speed and aperture are displayed.
Program shift ( %)
By turning the main dial (or sub dial) in the P mode, you
can change the combination of aperture and shutter
speed while maintaining the optimum exposure.
g“Program line diagram (P mode)” (P. 135)
• The program shift setting will not be cancelled after
shooting. To cancel the settings, turn the main dial
(or sub dial) until the shooting mode indication
% of
the LCD monitor changes to P. Alternatively, turn off
the power.
• Program shift is not available when you are using a
flash.
The shutter speed and aperture value are blinking:
j The optimum exposure cannot be obtained. For details, see “Exposure warning
display” (
gP. 136).
Program shooting
 TIPS
250 250 250 F5.6 F5.6
38 38
P
L N N
AF confirmation mark
Shooting mode
Shutter speed
LCD monitor
Aperture value
250 250 250 F5.6 F5.6
38 38
P
s
L N N
Program shift