Olympus E-P2 - Manual (Page 53)

53
EN
2
F
oc
u
s
ing and
shootin
g function
s
Selecting the AF target mode and position
Select the AF target mode or select the AF target to use with Single target AF mode.
1
Using [AF AREA] select M to enable selection of the AF target mode and
position.
2
Use the main dial and sub dial or arrow pad to
select the AF target.
Selecting the position of the AF target with the
arrow pad.
j The position of the AF target can be changed by
pressing the arrow pad.
g“n FUNCTION” (P. 99)
Registering an AF target mode
You can register a frequently used AF target mode and the position of that AF target. You can
then quickly load that registered setting (“home position”) and use it when shooting.
Registering
1
In the screen of Step 2 of “Selecting the AF
target mode and position” (
gP. 53), press
the
< button and F button at the same time.
• The home position is registered at the time the
buttons are pressed.
• The home position cannot be registered when
operated from a menu.
Shooting
To use this function, you must assign the [
PHOME] function to the < button in advance.
g“; FUNCTION” (P. 97)
1
Press the
< button.
• The registered home position is selected. Press this button again to switch to the original AF
target mode.
 TIPS
Set to B.
250 250 250 F5.6 F5.6
P
HP
Indicates that the AF target is
being registered.