Resetting the camera settings – Olympus E-P2 User Manual
Page 92
92
EN
6
Set
u
p function
s
In P, A, S, M or
n mode, current camera settings (including any changes you have made)
are retained when the power is turned off. To reset the camera to the factory default settings,
set [RESET].
Registering [RESET1]/[RESET2]
If settings after a reset are pre-registered to [RESET1]/[RESET2], the camera can be reset to
the factory default settings, by executing [RESET1]/[RESET2]. In the
n mode, settings
corresponding to the
n mode are reset.
For details on the registered functions, refer to “Functions that can be registered with My
Mode and Custom Reset Setting” (
gP. 140).
1
Select either [RESET1]/[RESET2] to register and press
i.
• If settings have already been registered, [SET] is displayed next to [RESET1]/[RESET2].
Selecting [SET] again overwrites the registered setting.
• To cancel the registration, select [RESET].
2
Select [SET] and press the
i button.
Using reset settings
This resets the camera to the factory default settings. You can also reset the camera to the
[RESET1] or [RESET2] setting.
[RESET]
Resets to the factory default settings. For the default settings, see
“Menu directory” (
gP. 141).
[RESET1]/[RESET2] Resets to the registered settings.
1
Select [RESET], [RESET1], or [RESET2] and press
the
i button.
2
Use
fg to select [YES], then press the i
button.
Resetting the camera settings
Menu
MENU[W][CUSTOM RESET]
Menu
MENU[W][CUSTOM RESET]
RESET1
YES
NO
BACK
SET