Brocade Communications Systems 53-1001778-01 - Manual (Page 30)

14 Brocade SMI Agent User’s Guide
53-1001778-01
About the Brocade SMI Agent Configuration Tool
3
• Server buttons
Some of the commands require you to start or stop the SMI-A server before they take effect.
Use the Start Server and Stop Server buttons to start and stop the SMI-A server. If the SMI-A is
configured as a service, the Start Server and Stop Server buttons start and stop the SMI-A as a
service.
These buttons also show the current status of the SMI-A server. If the server is running, the
Start Server button is disabled; if the server is not running, the Stop Server button is disabled.
• Action buttons
Apply Applies the changes you have made in the content pane, without closing the
window.
Cancel Cancels the changes you have made in the content pane, without closing the
window. Already applied changes cannot be undone.
Exit Closes the window and exits the application. You are prompted to apply any
unsaved changes.
NOTE
If user authentication is enabled, you are required to provide your user name and password in a
dialog box prior to performing certain actions (such as starting or stopping the server).
FIGURE 3 Components of the Brocade SMI Agent Configuration Tool
Menu tree
Content pane Action buttons
Server buttons
Title bar