Brocade Communications Systems 53-1001778-01 - Manual (Page 47)

Brocade SMI Agent User’s Guide 31
53-1001778-01
SMI Agent service configuration and removal
3
SMI Agent service configuration and removal
You must have Administrator privileges (Windows) or root/admin privileges (Linux, Solaris, and AIX)
to configure or remove the SMI Agent as a service. This option is disabled if you do not have the
appropriate privilege.
Configuring or removing the SMI Agent as a service
1. Launch the Brocade SMI Agent Configuration Tool.
2. Click Configure / Remove in the menu tree (see Figure 17 ).
The content pane displays the current setting, which is selected and dimmed.
3. To change the setting, click the button of the available option.
If the SMI Agent is installed as a service, the Remove as a Service option is available.
If the SMI Agent is not installed as a service, the Configure as a Service option is available.
4. Click Apply.
If you selected to configure the SMI Agent as a service, the SMI Agent is installed and started
as a service. The name of the service is “Brocade SMI Agent (J WBEM Server)”.
If you selected to remove the SMI Agent as a service, the SMI Agent is stopped (if it is running
as a service) and uninstalled.
FIGURE 17 Configure or remove SMI Agent as a service