Brocade Communications Systems 53-1001778-01 - Manual (Page 50)

34 Brocade SMI Agent User’s Guide
53-1001778-01
Fabric Manager database server configuration
3
4. Click Apply.
The changes take effect when you restart the server. Click Start Server to restart the server.
FIGURE 19 Configure ARR and eventing ports
Fabric Manager database server configuration
Configuring a Fabric Manager database server connection allows the Brocade SMI Agent to report
on historical port statistics by retrieving the data from the Fabric Manager database server. Not all
users have a Fabric Manager server installed and running in their environment. Here you can
specify the connection information for an existing Brocade Fabric Manager server. If your
management application does not make use of historical port statistics, you do not need to
configure a connection to the Fabric Manager database.
The Fabric Manager Database server TCP/IP listener is always started on port 2638, which is
registered with Internet Assigned Numbers Authority (IANA). Database connection credentials are
not user-customizable and are fixed at the factory.
Configuring the Fabric Manager database server connection
parameters
1. Launch the Brocade SMI Agent Configuration Tool.
2. Click Connection Parameters in the menu tree (see Figure 20 ).
The content pane displays the current connection parameters.
The Driver field is already populated with the default driver that is bundled in the agent:
com.sybase.jdbc2.jdbc.SybDriver.
Do not change this driver information.