Brocade Communications Systems 53-1001778-01 - Manual (Page 52)

36 Brocade SMI Agent User’s Guide
53-1001778-01
Firmware download software locations configuration
3
FIGURE 21 Configure firmware download software locations
3. To add a new entry, click the Add button and fill out the Software Location dialog box
( Figure 22 ) with the following values:
HostName/IP Address Type the host name or host IP address (in IPv4 or IPv6 format).
User name and Password Type the user name and password with which to log in to the host.
File Path Type either the absolute or relative path to the software file.
Firmware Type Select either FOS or SAS from the drop-down list.
FIGURE 22 Software Location dialog box
To modify an existing entry, select the entry in the content pane, click the Modify button, and fill
out the Software Location dialog box. You can modify only one entry at a time.
To remove an existing entry, select the entry in the content pane and click the Remove button.
4. Click Apply.
The changes take effect when you restart the server. Click Start Server to restart the server.