4. installing the machine head – Brother BE-438F User Manual

Page 22

Advertising
background image

3. INSTALLATION

13

KE-430F, BE-438F

3-4. Installing the machine head

(1) Pins [2 pcs]
(2) Set screws [2 pcs]
(3) Rubber cushion assembly [2 pcs]

Place the machine head gently on top of
the table.

NOTE:
• Be careful not to clamp any cords

between the machine head and the
table.

• When holding the machine head, do

not hold it by the pulse motor or the
solenoid, otherwise it may damage the
pulse motor or solenoid.















(4) Hinge holders [2 pcs]
(5) Bolts [4 pcs]
(6) Plain washers [4 pcs]
(7) Spring washers [4 pcs]
(8) Nuts [4 pcs]
(9) Rubber cushions [3 pcs]
(10) Collar [3 pcs]
(11) Plain washers [3 pcs]
(12) Screws [3 pcs]
(13) Felt
(14) Oil tube

Pass the felt (13) and the oil tube (14)
through the hole in the dust oiler setting
plate (15) into the oiler (16).











2282B

Figure

Pulse motor

Approx. 20mm

Approx. 20mm

Solenoid

2284B

Advertising
This manual is related to the following products: