Brother BE-438F - Manual (Page 62)

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
KE-430F, BE-438F 53
6-6. Direct selection
You can use the function keys to directly select program numbers and cycle program numbers. However, if a program
number has nothing recorded, it will not be displayed.
<Function keys>
The parameters which can be selected will vary depending on the memory switch settings.
406 = 0 (Initial setting)
Program No. 1 Program No.2 Program No.3 Program No.4
406 ዙ1
Program No.201 Program No.202 Program No.203 Program No.204
406 ዙ2
Program No.C01 Program No.C02 Program No.C03 Program No.C04
406
ዙ3
Item specified by memory
switch No. 407 Item specified by memory
switch No. 408 Item specified by memory
switch No. 409 Item specified by memory
switch No. 410
2441B
2442B 2443B 2444B 2445B
2442B 2443B 2444B 2445B
2442B 2443B 2444B 2445B
2442B 2443B 2444B 2445B