2. cleaning the control box air inlet ports, 3. draining the oil, 4. cleaning the eye guard – Brother BE-438F User Manual
Page 67: 5. checking the needle, 6. lubrication
8. MAINTENANCE
58
KE-430F, BE-438F
8-2. Cleaning the control box air inlet ports
፧
Use a vacuum cleaner to clean the filter in the air inlet ports
(2) of the control box (1) at least once a month.
8-3. Draining the oil
፧
1. Remove and empty the waste oil container (1) whenever
it is full.
2. After emptying the waste oil container (1), screw it back
into its original position.
* Check that the felt (2) is inside the oiler (1).
8-4. Cleaning the eye guard
፧
Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
8-5. Checking the needle
Always check that the tip of the needle is not broken and
also the needle is not bent before starting sewing.
8-6. Lubrication
Carry out the lubrication referring to “3-12. Lubrication”.
2311B
2309B
2310B
2457B