Local installation, Step 2 connecting the console to the switch – Belkin F1DP116Gea User Manual
Page 18
Advertising
![background image](/manuals/48668/18/background.png)
14
Step 2 Connecting the Console to the Switch
2.1 Connect your monitor VGA cable to the VGA port on the back of the
Switch in the “Console” section. (Refer to diagram below.)
�����������
�������
�����
���
������
��������
2.2
and mouse ports on the back of the Switch in the “Console” section.
(Refer to diagram below.)
�����������
�������
�����
���
������
��������
Local Installation
Advertising
This manual is related to the following products: