Belkin F1DP116Gea - Manual (Page 35)

31
1
2
3
4
5
6
7
8
9
10
se
ct
io
n
Step 3 Network Configuration
When first connecting to the Switch’s HTTPS configuration page, two browser
security warnings may appear. Click “Yes” on both warnings.
Note: The first security warning only occurs once per client machine. This is
when the Belkin root certificate is installed. The second warning can be avoided
by adding a line to your Windows “hosts” file (typically at
\winnt\system32\
drivers\etc\hosts—edit using Notepad). The line format should be “IP address
any name.kvm.net”. (For example:
192.168.2.155BelkinSMB.kvm.net.)
Device Name
Type in a name you would like to assign the Switch. The default device name
consists of the letter “D” followed by the 7-digit device number located on the
back of the Switch.
First TCP Port
Choose three consecutive Transmission Control Protocol (TCP) ports, and type in
the first port number of the series. The default port is port 900. This is suitable for
the majority of installations.
Note: Your firewall or router security access list must enable inbound
communication through the selected TCP ports for the Switch’s address.
Ports 80 and 443 are used for standard Web communication and should be
open. For client-computer access from a secured LAN, the selected ports
should be open for outbound communication.
Remote Installation