Local installation – Belkin F1DP116Gea User Manual
Page 24
Advertising
20
20
Step 3 Connecting Servers to the Switch
(Sun MiniDIN8 Connection)
3.1 Make sure your server is powered off.
3.2 Using the Belkin OmniView SMB Server Interface Module for Legacy
Sun (F1DP101AeaAL), connect the VGA connector to the monitor port
on your server. (Refer to diagram below.)
3.3 Connect the miniDIN8 connector to the miniDIN8 keyboard port on the
server. (Refer to diagram below.)
Server
Server Interface Module
Local Installation
Advertising
This manual is related to the following products: