Local installation – Belkin F1DP116Gea User Manual
Page 20
Advertising
![background image](/manuals/48668/20/background.png)
16
Step 3 Connecting Servers to the Switch
(PS/2 Connection)
3.1 Make sure your server is powered off.
3.2 Using the Belkin OmniView SMB Server Interface Module for PS/2
(F1DP101AeaAP), connect the VGA connector to the monitor port on
your server. (Refer to diagram below.)
3.3
keyboard ports on the server. (Refer to diagram below.)
Server
Server Interface Module
Local Installation
Advertising
This manual is related to the following products: