Chapter 7 hw setup and passwords, Hw setup, Accessing hw setup – Toshiba Tecra A2 User Manual
Page 116: Hw setup window, Hw setup and passwords, Hw setup -1, Accessing hw setup -1, Hw setup window -1, Hw setup and, Passwords
User’s Manual
7-1
TECRA A2
Chapter 7
HW Setup and Passwords
This chapter explains how to use the TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
The TOSHIBA HW Setup program allows you to configure settings for
various system and hardware functions including those for Parallel/Printer,
Device Config, Display, CPU, Boot Priority, Keyboard, LAN and USB.
Accessing HW Setup
To run HW Setup, click start, click Control Panel, click Printers and Other
Hardware and select TOSHIBA HW Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Password,
Parallel/Printer, Device Config, Display, CPU, Boot Priority, Keyboard, LAN
and USB.
There are also three buttons: OK, Cancel and Apply.
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to the
computer. Some models are not equipped with Parallel/Printer tab and/or
CPU tab.
OK
Accepts your changes and closes the HW Setup
window.
Cancel
Closes the window without accepting your
changes.
Apply
Accepts all your changes without closing the HW
Setup window.