Toshiba Tecra A2 - Manual (Page 170)

User’s Manual B-12
Display Controller and Modes
WinDVD 5.0 Sub-panel
■ The following [Set up] screen is displayed, then remove the check of
[Use Hardware Decode Acceleration]
(The check of [Use Hardware Color Acceleration]is removed
automatically).
Setup
■ Click [OK] button(The [Set up] tab closes automatically).
4. The DVD video overlay is not displayed when the display mode of the
CRT display is set to high resolution and high refresh rate mode at LCD/
CRT simultaneous or multi-monitor.
Please decrease the resolution and refresh rate of the CRT display.
5. When the display mode is TV or simultaneous LCD (internal liquid
crystal display)/TV and the system goes into Standby or Hibernation
Mode, you can switch to the LCD (internal liquid crystal display) display
mode by pressing [Fn] + [F5]. Under this environment, however, you
may not return to the TV or simultaneous LCD (internal liquid crystal
display)/TV display mode.
In these cases, perform the following steps:
Press [Ctrl] + [Alt] + [F12] to select [Intel(R) 82852/82855 GM/GME
Graphics Controller Prope...]. Then click the icon indicating a display
device (display mode) you want to use in the left pane of the [Devices]
tab.