Toshiba Portege R200 (PPR21) - Manual (Page 112)

User’s Manual 7-3
HW Setup
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
* 1 Floppy disk drive is looked for when the boot disk is contained in external
floppy disk drive. When SD memory card is set as the boot disk, external
floppy disk drive is looked for first. Next, SD memory card is looked for.
* 2 CD-ROM is looked for when the boot disc is contained in external optical
media drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Built-in
HDD, CD-ROM, floppy disk drive (or SD memory card), Network (LAN),
USB Memory boot.
CD-ROM −> LAN −>
HDD −> FDD
The computer looks for bootable files in the
following order: CD-ROM*
2
, LAN, HDD, floppy
disk drive*
1
.
CD-ROM −> LAN −>
FDD −> HDD
The computer looks for bootable files in the
following order: CD-ROM*
2
, LAN, floppy disk
drive* 1 and HDD.
U Selects the USB floppy disk drive.
N Selects the Network.
1 Selects the primary HDD.
C Selects the CD-ROM* 2 .
M Selects the USB Memory.
HDD −> FDD −>
CD-ROM −> LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive* 1 ,
CD-ROM*
2
and LAN (Default).
A bar will appear only under the selected device.