Toshiba Portege R200 (PPR21) User Manual
Page 126
User’s Manual
8-8
Optional Devices
5. Seat the memory module cover and secure it with one screw.
Seating the memory module cover
6. Install the battery pack. Refer to
section in
Chapter 6, Power and Power-Up Modes, for details.
7. Return your computer to the upright position.
8. Turn the computer power on and make sure the added memory is
recognized.
Click start, click Control Panel, click Performance and Maintenance
and select the System icon. Open System Properties window and
click General tab.
Removing memory module
To remove the memory module, make sure the computer is in boot mode
then:
1. Set the computer to boot mode and turn the computer’s power off.
Make sure the Power indicator is off.
2. Remove AC adaptor and all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack. Refer to
section in Chapter 6, Power and Power-Up
Modes, for details.
4. Push the latches to the outside to release the module. A spring will
force one end of the module up.
Be sure that the cover is closed firmly.
Be sure that the cover is closed firmly.