Turning on the power, Turning on the power -9 – Toshiba Portege R200 (PPR21) User Manual
Page 53
Advertising
User’s Manual
3-9
Getting Started
Opening the LCD display panel
Turning on the power
This section describes how to turn on the power.
The Power button LED indicates the status. Refer to the
section in Chapter 6, Power and Power-Up Modes.
1. Open the computer’s LCD display panel.
2. Press and hold the computer’s power button for two or three seconds.
Turning on the power
LCD display panel
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section
.
■
If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
Power button
Advertising