Toshiba L9363 - Manual (Page 13)

13
Eng
lis
h
CONNECTING YOUR TV
To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 95.
To display the optimum picture, use the PC setting feature
(see page 85).
To output audio signal from the TV
Connect a PC to the RGB/PC terminal, then connect audio
output on the PC to the PC/HDMI 2 (AUDIO) jack using a
PC audio cable.
• Select PC for PC/HDMI 2 AUDIO setting. (See page 87.)
NOTE:
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a
compatible mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of
the PC on which you are playing the DVD-Video, some
scenes may be skipped or you may not be able to pause
during multi-angle scenes.
• A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to scaling of
the picture by the set, it is not a malfunction.
• When PC input mode is selected, some of the
television’s features will be unavailable e.g. Colour
System in the Options menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 95).
• If connecting a certain PC model with a unique PC
signal, the PC signal may not be detected correctly.
Connecting a home network
The LAN port allows your Toshiba TV to
connect to your home network. You can use this
revolutionary home entertainment networking
system to access photo, video and audio files
that are stored on a media server and play/
display them on your TV.
NOTE:
• If you connect to a shared network outside your home, it
is advisable to use a router. Always use network media
products in private network environments. Connect this
TV to the same router as other network media products
(server).
• If you use a hub or switch to connect the TV to your
home network, you may not be able to use the automatic
setup and will have to manually set up the network
address. See page 50.
• If you use a router with built-in DHCP functionality, use
the automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover
LAN cable.
• Please consult your PC manufacturer about details of
PC settings.
• Wireless appliances may interfere with Intel ® Wireless
Display.
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do not connect a phone jack directly to the TV’s LAN port.
Warning: This TV complies with the EMC directive only
when you use a shielded Cat5 ethernet cable.
PC/HDMI 2
(AUDIO)
Computer
Audio cable
the back and side of your television
To connect the TV to a home network
- Wired
LAN
[1] [2]
[2]
[3] [2]
Cable or Phone jack
the back of your television
Modem (if available) Router with Hub
Server PC