Toshiba L9363 - Manual (Page 15)

15
Eng
lis
h
CONNECTING YOUR TV
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side/back of the
television.
While all the necessary adjustments and controls for the television are made using the remote
control, the buttons on the television may be used for some functions.
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
1 on the remote
control; it may take a few moments. The GREEN LED will
be lit.
To put the television into Standby, press
1 on the remote
control. To view the television, press 1 again. The picture
may take a few seconds to appear.
• To turn on or off the TV, press ! .
• To alter the volume, press + or –.
+ and – buttons operate as volume up/down as default.
• Press p / o repeatedly to switch the function of 2 +/
– button as below.
Channel→Input→Volume
The Media Player feature provides access to photo, movie
and music files stored on a USB storage device that is
connected via the USB 1 or USB 2 port, SD card inserted
to the SD card slot or on a network device.
Please always refer to the owner’s manual of the
equipment to be connected for full details.
NOTE:
• The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other
connected equipment.
• Interactive video games that involve shooting a “gun” at
an on-screen target may not work with this TV.
SD
Control panel
USB 2 port
Media Player/USB HDD connection port
Power LED
On = Green
Standby = Red
ILLUSTRATION SHOWS 58L9363.
Remote sensor
DVB COMMON INTERFACE
The Common Interface is for a Conditional
Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may
be automatically executed. At this time, your
Recording/Reminder programming will be
cancelled.
Light sensor
USB 1 port (on the
back of the TV)
Media Player/USB
HDD connection port
SD card slot
To remove the SD card, push it in.
3D-IR
(for 58L9363)
Switching on
For energy saving:
We recommend that you use the television with the
factory settings. The factory settings are for energy
saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television
is not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy
use.
Energy efficiency cuts energy consumption and can
save money.
NOTE: Putting the television into Standby will reduce
energy consumption, but will still draw some power.
Using the TV controls and
connections