Toshiba L9363 - Manual (Page 54)

54
En
gli
sh
CONTROLS AND FEATURES
USB HDD Record Function
This function can be used to record and play
digital broadcast programmes (function is
dependant on country selection). Read the
precautions below before recording or viewing
programmes using the USB HDD record
function.
NOTE:
• In order to use this function, a USB HDD needs to be
connected to the TV. Do not use USB Hub.
• After recording operation, time may take to a recording
start.
• Recorded programmes saved on the USB HDD can only
be viewed on this TV. They cannot be viewed when
connected to another TV (including the same model of
TV), a PC, or other device.
• You cannot watch other channel while recording one
channel.
• If the recording time to the USB HDD is too short, no
data may be saved.
• You cannot record video input signals on the USB HDD.
• Not all types of broadcast may be recordable.
• After programming the TV to record digital broadcasting,
do not disconnect the power plug before recording
starts.
• Should video or audio recording fail due to malfunction
of the TV or poor reception, no compensation would be
paid.
• If there is a power failure or the power plug is
disconnected during programmed recording, recording
will stop and will not resume when the power returns or
the plug is reconnected.
• Do not disconnect the power plug when the indicator
LED is lit.
• Any changes implemented by the broadcasting station
may affect programme scheduling.
• Scheduling of multiple consecutive programmes may
result in the beginning of each programme not being
recorded.
• Accurate start / finish time for recording is reliant on
broadcasters maintaining correct time stamp if this not
the case the recording will fail.
• Some broadcasters can control whether a program can
be recorded or how long you may be able to view it for
after recording. The on screen message “Retention limit
expired” means that the time limit for viewing the
program has lapsed.
• Programmed recording cannot take place if the power
plug is not connected.
• Disconnecting the power plug during recording may
result in failure to save the recorded programme.
• USB HDD recording feature is not available in all
countries.
• When the USB HDD is formatted, all the data stored on
the HDD will be erased.
To connect a USB HDD (not supplied):
When you connect a USB HDD to the USB1 port on the
TV, a prompt will appear.
a
Press C / c to select No and press OK.
NOTE: Not guaranteed to work with all USB HDD.
To record the programme currently being viewed.
a
Press the REC button on the remote control.
The currently viewed programme will start to be
recorded.
To stop recording:
a
Press the v (stop) button.
A confirmation window “Do you want to stop
Recording?” will appear.
b
Press C / c to select Yes and press OK.
Recording will stop.
Setting up the USB HDD for
recording
To record DTV programmes
(One Touch Recording)
USB1 on the TV
USB cable
(not supplied) USB HDD