Tv power on control (active standby), Media renderer setup, Device name setup – Toshiba L9363 User Manual

Page 53

Advertising
background image

53

Eng

lis

h

CONTROLS AND FEATURES

Device Registration Setup

Once a User Name has completed authentication, it is
stored in the TV along with the password. The upper limit
for the number of Use Names that can be remembered is
20. You can delete User Names that are stored in the TV.

a

In the Network menu, press

B

/

b

to select

Network Device Setup and press OK.

b

Press

B

/

b

to select External Control Setup and

press OK.

c

Press

B

/

b

to select Apps Control Profile and

press OK.

d

Press

B

/

b

to select Device Registration Setup

and press OK.
The Device Registration Setup screen will
appear and the list of Companion Device ID
managed by the TV will be displayed.

e

Press

B

/

b

to highlight the Companion Device

ID.

f

Press

B

/

b

to select the Cancel, All, or Delete

buttons and press OK.

NOTE: When re-registering a device which has been
deleted from the list, registration must be carried out
again.

When the TV is connected to the home network via

Wireless LAN, with the TV Power On Control in Enabled,

your TV can be turned on by control from Apps.

a

In the Options menu, press

B

/

b

to select Power

Management and press OK.

b

Press

B

/

b

to select TV Power On Control and

press

c

and

B

/

b

to select Enabled (Active

Standby).

NOTE:
• Depending on the device connected to the home

network, it may take a while for the TV to turn on.

• Depending on the device connected to the home

network, this feature may not work.

• If the unencrypted Wireless Setup is done, this feature

can not be used.

• The power consumption during Active Standby is more

than it during Normal Standby.

• After the change from Power On state to Active Standby,

there may be a period of several ten seconds which
does not receive the operation from a remote control or
external apparatus.

The TV can be configured as a media renderer.

When operating as a media renderer, the TV displays

content provided by a media server.

The selection of the media is done by media controller.

The TV can play photo, movie, or audio files when

operating as a media renderer.

a

In the Network menu, press

B

/

b

to select

Network Device Setup and press OK.

b

Press

B

/

b

to select Media Renderer and press

c

and

B

/

b

to select On.

If request comes from media controller, prompt will appear
and the Media Renderer function will start.

To exit the Media Renderer:

Press EXIT.

Terminology

MS: Media Server

MR: Media Renderer

MC: Media Controller

NOTE: You cannot use 3D function in operating as a
media renderer.

The TV’s device name can be changed.

a

In the Network menu, press

B

/

b

to select

Network Device Setup and press OK.

b

Press

B

/

b

to select Device Name Setup and

press OK.
The Device Name Setup screen will appear.

c

Press

B

/

b

to select Device Name and press

OK. The Software Keyboard window will appear.

d

Input the Device Name by using the software
keyboard (see page 52). To save your setting,
press the GREEN button.

NOTE:
• The Device Name can be up to 15 characters

long.

• Only the 0-9, - and A-Z (uppercase only)

characters may be used for the device name.

e

Press

b

to highlight Done and press OK to save

your setting.

TV Power On Control (Active

Standby)

Media Renderer Setup

Device Name Setup

Advertising