Connecting an hdmi or dvi device to the hdmi input – Toshiba W2333 User Manual

Page 13

Advertising
background image

13

English

Connecting an HDMI or DVI device to the HDMI input

The HDMI input on your television receives digital audio and uncompressed digital video from an
HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme mate-
rial in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top
box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 19.

NOTE:

• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the

adoption of a new standard.

• Supported Audio format: Linear PCM and Dolby Digital, sampling rate 32/44.1/48kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) from the device to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo
(

®

).

• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates

greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work
properly with this mode.

• HDMI cable transfers both video and audio. Separate analogue audio cables are not required

(see illustration).

HDMI

cable

(not supplied)

HDMI device

HDMI out

For 32W23** | 32/39L23**

Advertising