Hdmi cec control, Equipment control, Select hdmi cec device – Toshiba W2333 User Manual
Page 50
50
English
Equipment Control
The HDMI CEC mode on the television’s
remote control allows the control of connected
HDMI CEC equipment being watched.
To control the HDMI CEC input source,
¿ rst
select the equipment with HDMI CEC input
source selection, then switch the mode on the
remote control to HDMI CEC and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote con-
trol keys may be available. Please refer to the
operation manual for each piece of equipment
connected.
HDMI CEC Control
This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba
HDMI CEC compatible equipment from the television’s remote control.
NOTE: Not all Toshiba products currently support HDMI CEC.
Select HDMI CEC Device
Press
. A list appears on screen
showing modes and all stored external
equipment.
The HDMI-LINK icon appears auto-
matically after detected with HDMI CEC
compatible equipment. Press
Ÿ or ź to
highlight the input source shown with the
HDMI-LINK icon.
Inputs
TV
1
2
3C
HDMI1
HDMI2
MEDIA
PC
HDMI-LINK
Press
Ź. and the device selection menu
appears showing all connected HDMI
CEC equipment.
Press
Ÿ or ź to highlight the desired
HDMI CEC equipment, and then press
to select.
Inputs
TV
1
2
3C
HDMI1
HDMI2
MEDIA
PC
HDMI-LINK
HDMI1
Disc Player