Toshiba W2333 - Manual (Page 51)

51
English
One Touch Play
The function of HDMI CEC will automatically
power on the television that was in standby
mode and switch the television’s input source
to the port connected with the audio/video
equipment by powering-on or playing from the
audio/video equipment.
NOTE: This feature is dependent on the
connected equipment and television
setting.
System Standby
This feature automatically switches the con-
nected equipment into standby when the
television goes into standby and conversely
for the television to switch into standby when
connected equipment goes into standby. It is
selected in the HDMI CEC Control menu.
NOTE: This feature is dependent on the
connected equipment and television
setting.
System Audio Control
Using the Speaker Preference feature allows
the television’s remote control to adjust the
volume or mute the sound of the speakers con-
nected to the television via an AV ampli
¿ er.
Ensure that the connected AV ampli
¿ er and
HDMI CEC equipment are selected in the input
source selection and that the Speaker Prefer-
ence is set to Ampli
¿ er in the HDMI CEC
Control menu.
NOTE: When the AV Ampli
¿ er is switched on,
its input source changed or the volume
adjusted, the sound will be output from
the AV Ampli
¿ er’s speakers even if TV
speakers has been selected. Turn the
television off then on again to output
the sound from the TV’s speakers.
The full function may not work and is depend-
ent on the ampli
¿ er being used.
Enable HDMI-LINK
When the Enable HDMI-LINK is set to On, it
allows the other functions to be enabled.
Press MENU. Press
Ż or Ź to select
PREFERENCES and press to enter
the submenu.
SOUND APPLICATIONS PREFERENCES PICTURE SETUP
Press
Ÿ or ź to select HDMI CEC Con-
trol, and press to enter the submenu.
RETURN Back
PREFERENCES
HDMI CEC Control
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
DivX Registration
DivX Deregistration
Auto
Off
On
Off
On
1
OK
OK
OK Enter
Press
Ÿ or ź to select Enable
HDMI-LINK, and press Ż or Ź to select
On or Off.
RETURN Back
HDMI CEC Control
Enable HDMI−LINK
Auto Power On
Auto Standby
Amplifier Control
Speaker Preference
On
On
On
On
TV Speakers
Edit
HDMI CEC Menus
By activating the Enable HDMI-LINK feature in the HDMI CEC Control menu, individual
HDMI-LINK features can then be activated.