Toshiba Equium L20 - Manual (Page 124)

7-8 User’s Manual
Optional Devices
USB floppy disk drive
The 3 ½" external floppy disk drive module can be connected to the USB
port. For details on connecting the 3 ½" external floppy disk drive module,
refer to Chapter 4, Operating Basics .
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports several video modes. Refer to
Appendix B, Display Controller and Modes . To connect a monitor, follow the
steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the Windows
® Bootup screen (Windows ®
Logo) appears on the display device.
However, the Windows
® Desktop appears on a display device that you
used last time to shut down your PC, if the display device exists when you
turn on the power.
To change the display settings, press Fn+F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn+F5 to switch to the
internal display. Refer to Chapter 5, The Keyboard , for details on using hot
keys to change the display setting.