Toshiba Magnia Z500 - Manual (Page 17)

MegaRAID Configuration Console
Using MegaRAID Configuration Console
17
The functions of the left button are as follows:
Right This frame displays the type of actions you can perform. It
also displays extended options and links when certain links
are selected.
Name Description
Scan Devices Rescans system for new hard drives. After pressing this but-
ton, this driver rescans all hard disk drives connected to the
MegaRAID controller. You will notice a significant decrease
in system performance for a few seconds.
Config View Displays the RAID configuration, media errors, and status of
the drives and arrays. It also allows you to start activity on
particular array.
! Logical View - displays information about the arrays.
! Physical View - displays all connected hard disk drives
attached to the MegaRAID controller.
Device
Progress Displays the progress bar for the current activity on the
MegaRAID controller. The progress bar displays the time
left and percentage complete. Possible activities include the
following:
! Rebuild
! Consistency Check
Log Data Displays activity log information. All activities add records
to the activity log file. The size of this file can be modified by
clicking on the Advanced button
Advanced Allows you to modify the parameters for the RAID system.
Back Plane Stops the beep and displays/erases the log data stored in a
back plane.
Close Server Returns to the list of available servers.
Frame Description