Toshiba Magnia Z500 - Manual (Page 23)

MegaRAID Configuration Console
Config View
23
To view the Physical Drive Properties, Fail Drive and Error Status,
click on the blue button in the upper middle frame next to physical
drive you would like to view. The icon looks like the one pictured
below.
After you click on it, the Physical Drive ID will display in the right
frame. The link to the RAID controller Properties, Fail Drive and
Error Status page will be listed as shown below. Click on the
word “Properties” to view the Physical Drive Properties. Click on
the “Fail Drive” to fail the drive. Click on the “Error Status” to
view the Physical Drives Error Status.
Physical Drive Fail
After clicking on the “Fail Drive”, “degraded” is displayed on the
right side of array configured with the failed physical drive.
This function is supported only in RAID1(Mirror) array.