Toshiba Magnia Z500 User Manual
Page 29
Advertising
MegaRAID Configuration Console
Config View
29
Array
To view the Array Properties, Check the Consistency, or Rebuild
the array, click on the blue button in the lower middle frame next
Array. The icon looks like the one pictured below.
After you click on it, the Array ID will display in the right frame.
The link to the Array Properties, Check Consistency, and Rebuild
will be listed as shown below. Click on “Properties” to view the
Array Properties. Below are described Array operations.
Array Check Consistency
Click on “Check Consistency” to check the correctness of the
redundant data in an array. You can choose to make the data on
both drives identical. This function can be performed just on
RAID1 arrays.
Advertising