Standby channel update – Toshiba MV732 User Manual
Page 20
20
SETTING UP YOUR TV
En
g
li
sh
Move
— Press the GREEN button to activate the
Move feature. Use the
B
or
b
buttons to select the
channel you wish to move and press
Q
to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat as
necessary.
Once all desired channels have been checked, use the
B
or
b
buttons to place the focus at the position to
which you wish to move the channels. The channels
will be inserted above the highlighted channel. Press
the GREEN button to execute the move.
Sort
— Press the YELLOW button. A confirmation
window will appear. Press
C
or
c
to select Yes and
press
Q
.
The Sorting Type selection window will appear.
Press
C
or
c
to set the sorting type.
A - Z
Station name order (A to Z)
Channel Number Position No. order (numerical
sequence)
Press
b
to highlight Sort and press
Q
.
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a
Select DTV Settings from the SETUP menu and press
Q
.
b
Press
b
to select Standby Channel Update and use
C
or
c
to select On.
This feature allows you to manually select the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9)
to be used for DVB-C or DVB-T channels.
a
Select DTV Settings from the SETUP menu and press
Q
.
b
Press
b
to select DVB Character Set and use
C
or
c
to select Standard, West or Latin alphabet 9.
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
“Broadcast information has changed. Would you like to
rescan now?”. Please follow the message. If you do not wish
for the TV to detect changes and prompt you to rescan, you
should set this feature to "Off".
a
Select DTV Settings from the SETUP menu and press
Q
.
b
Press
b
to select Dynamic Scan and use
C
or
c
to
select On.
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.
a
Select Location from the SETUP menu.
b
Press
C
or
c
to select Home or Store.
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
Standby Channel Update
Channels
Line No. 1/10
TV
1
ABC ONE
Pos.
Name
822
AA
823
AC
2
ABC TWO
7
ABC THREE
30
CABC Channel
40
ABC NEWS 24
51
ABCi
Sort
Your existing channel order will be lost. Do you wish to
continue?
Yes
Sorting Type
A - Z
Sort
Sort
DVB Character Set
Dynamic Scan
Location setting
Analogue switch-off
RVXVMV73_WebOM_UK.book Page 20 Monday, April 19, 2010 10:46 AM