Toshiba MV732 - Manual (Page 57)

57
CONTROLS AND FEATURES
En
glish
Adjusting the Sampling Clock alters the number of pulses per
scan, this will clear vertical lines on the screen.
a
In the Display Settings menu, press b until PC
Settings is highlighted.
b
Press Q to select, and then b to highlight Sampling
Clock.
c
Use C or c to adjust until the picture clears.
Use Reset to return all items to the original factory settings.
a
In the Display Settings menu, press b until PC
Settings is highlighted.
b
Press
Q
to select, and then b to highlight Reset.
c
Press
Q
.
NOTE: When a PC is connected using HDMI, none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Input selection and AV
connections
See page 8 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively, press the external source selection button o
until the picture from connected equipment is shown.
An S in the display e.g. o 2S (EXT 2S), indicates the input is set
for an S-Video signal.
Use the Input Selection window if the television does not switch
over automatically.
a
By pressing o on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.
HDMI ® displays equipment connected to Input HDMI
on the back or side of the television.
PC displays a computer connected to Input RGB/PC on
the back of the television.
Sampling Clock
Reset
Input selection
Inputs
TV
1
2
3
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4**
Inputs
DTV TV
DTV RADIO *
DTV TEXT *
1
2
3
4
4
HDMI 3
HDMI 2
ATV
HDMI 4**
PC
HDMI 1
Pressing o on the
remote control
Pressing o on the TV
right side panel
* If radio or text channels
are currently available for
DTV.
** RV/XV series only
RVXVMV73_WebOM_UK.book Page 57 Monday, April 19, 2010 10:46 AM