Toshiba MV732 - Manual (Page 40)

40
CONTROLS AND FEATURES
En
g
li
sh
Manual Start:
a
Insert USB device into the USB socket or SD Memory
Card into the SD card slot on the right side of the TV.
b
In the APPLICATIONS menu, select Media Player,
and press
Q
.
c
Press B or b to select Photo and press Q . The
thumbnail will appear.
NOTE: If the selection window is displayed, press B or
b to select USB or SD Memory Card.
To select a file in the list of contents:
a
Press B or b to select a file or folder.
b
Press
Q
to move to the next layer, or press RETURN
to return to the previous layer.
To close the Media Player:
a
Press EXIT.
Using the Media Player with a DLNA CERTIFIED™
Server
You need to configure a home network before using
this feature (see page 12).
a
In the APPLICATIONS menu, highlight Media
Player, and then press
Q .
b
Press B or b to select Photo, Movie, or Music and
press Q . The thumbnail (for Photo) or list of files (for
Movie and Music) will appear.
NOTE: If there is more than one media server on the
network, a list of all media servers will be displayed.
Highlight the server you want to use, and press
Q
.
c
Press B or b to select a DMS if the selection window
is displayed.
To select a file in the list of contents:
a
Press B or b to select a file or folder.
b
Press Q to move to the next layer, or press RETURN
to return to the previous layer.
To close the Media Player:
a
Press EXIT.
To set the Media Server Setup:
You only need to complete the Media Server Setup if
you want to store a list of DMSs to activate later from
the TV.
a
In the APPLICATIONS menu, highlight Media
Player, and then press
Q
.
b
Press B or b to highlight Setup, and press
Q
.
c
Press B or b to highlight Media Server Setup, and
press
Q
. A list of currently available DMSs will
appear.
d
Press B or b to select the desired device, and press
Q
. A check will appear in the box. To remove the
check, press again.
e
Press c to highlight Done, and then press
Q
to save.
NOTE:
• Up to 8 DMSes can be selected.
• If the device is checked, it will still be displayed (with gray
out) in the Select Device window, even if it is currently
powered off. When
Q
is pressed with the highlight on a
grayed out item, a confirmation window for Wake-on-LAN
will be displayed. If Yes is selected, the TV will attempt to
power up ("wake up") the DMS. If the server supports Wake-
on-LAN, it will start up.
• When several DMSs are connected, it may take some time
for the list to be displayed.
The following operations may help to improve the display
time.
- Close the device selection window, and open it again.
- Press the RED button to update the list.
Photo
Setup
Media Player
RVXVMV73_WebOM_UK.book Page 40 Monday, April 19, 2010 10:46 AM