Using the hard disk drive (hdd) protection, Using the hard disk drive (hdd) protection -39, Act. refer to the – Toshiba Satellite Pro S200 User Manual

Page 113: Using the, Hard disk drive (hdd) protection, Section

Advertising
background image

User’s Manual

4-39

TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

Using the Hard Disk Drive (HDD) Protection

This computer has a function for reducing the risk of damage on the hard
disk drive.

Using an acceleration sensor built into the computer, TOSHIBA HDD
Protection detects vibration shocks and similar signs of movement of the
computer, and automatically moves the Hard Disk Drive head to a safe
position to reduce the risk of damage that could be caused by head-to-disk
contact.

When vibration is detected, a message will be displayed on the screen, and
the icon in the taskbar notification area will change to the protection state.
This message is displayed until the OK button is pressed or 30 seconds
pass. When vibration subsides, the icon returns to the normal state.

Taskbar Icon

TOSHIBA HDD Protection Properties

You can change the TOSHIBA HDD Protection settings by using the
TOSHIBA HDD Protection Properties window. To open the window, click
Start -> All Programs -> TOSHIBA -> Utilities -> HDD Protection
Setting
. The window can also be started from the icon on the Taskbar or
from the Control Panel.

HDD Protection

You can choose whether to enable or disable TOSHIBA HDD Protection.

Detection Level

This function can be set to four levels. The sensitivity levels in which
vibrations, impacts and their similar signs are detected can be set to OFF,
1, 2 and 3 in ascending order. Level 3 is recommended for better protection
of the computer. However, when the computer is used in a mobile
environment or in other unstable conditions, setting the detection level to 3
could result in frequent execution of TOSHIBA HDD Protection, which will
slow Hard Disk Drive reading and writing. Set a lower detection level when
the speed of Hard Disk Drive reading and writing is a priority.

This function does not guarantee that the hard disk drive will not be
damaged.

State

Icon

Description

Normal

TOSHIBA HDD Protection is enabled.

Protection

TOSHIBA HDD Protection is active. The
hard disk drive head is in a safe position.

OFF

TOSHIBA HDD Protection is disabled.

Advertising
This manual is related to the following products: