Usb fdd kit, Connecting the usb floppy diskette drive – Toshiba Satellite Pro S200 User Manual

Page 68

Advertising
background image

3-24

User’s Manual

TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150

USB FDD Kit

The USB floppy diskette drive accommodates either a 1.44MB or 720KB
floppy diskette and connects to one of the computer’s USB ports.

The USB floppy diskette drive

Connecting the USB floppy diskette drive

To connect the drive, plug the floppy diskette drive’s USB connector into a
computer’s USB port.

Connecting the USB floppy diskette drive

Eject button

Floppy diskette slot

Disk-In-Use Indicator

USB connector

Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.

USB connector

USB port

If you connect the USB floppy diskette drive after the computer has already
been turned on, it will take about ten seconds for it to be recognized by the
computer. Do not attempt to disconnect and reconnect the drive before this
period has elapsed.

Advertising
This manual is related to the following products: