Using optical disc drives, Using optical disc drives -11, Using optical – Toshiba Satellite Pro S200 User Manual
Page 85: Disc drives, Loading discs
User’s Manual
4-11
TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150
Using optical disc drives
The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows.
If you have a DVD-ROM&CD-R/RW drive, refer also to the
section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the
section for precautions on writing to CDs/DVDs.
Loading discs
To load CD/DVDs, follow the steps below.
1. When the computer’s power is on, press the eject button to open
the disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
Pressing the eject button and pulling the disc tray open
Use the WinDVD application to view DVD-Video discs.
Disc tray