Toshiba Satellite Pro S200 - Manual (Page 187)

User’s Manual D-3
TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150
Windows Setup Procedure
1. Connect the USB floppy diskette drive and insert the disk created in the
previous step.
2. Insert the Windows Setup CD-ROM into the optical disc drive and boot
the computer up from the CD. The Windows Setup program will start.
3. When the message “Press F6 if you need to install a
third party SCSI or RAID driver ” appears on the screen,
press the F6 key.
4. When the message “Setup will load support for the
following mass storage device(s): ” appears on the screen,
press the S key.
5. Select “Intel(R) 82801HEM/HBM SATA AHCI Controller
(Mobile ICH8M-E/M) ” and press the Enter key.
6. Follow the onscreen instructions to continue setting up windows.
How to install Intel ® Matrix Storage Manager on Windows XP
or Windows Vista™:
To install this software on Windows XP or Windows Vista™ logon with an
account that has administrator user privileges.
1. Double-click the Intel ® Matrix Storage Manager setup file
(“iata_cd.exe”) located in the
C:\TOSAPINS\Intel Matrix Storage Manager
folder.
2. Follow the onscreen installation instructions.
3. Restart the system.
■
Please use only hard disk drives that the computer supports. The
system may not function correctly if unsupported hard disk drives are
used.
■
Errors may occur in the following situations:
■
When using applications which directly access the hardware and
read from or write to the hard disk drive.
■
When using another operating system, such as Linux, to run
application that read from or right to the hard disk drive.