Manually configuring your router – Belkin F5D7632uk4v3000 User Manual
Page 38
39
38
Manually Configuring your Router
39
38
5.
Enter the waiting time after authentication failed in the “Quiet Period”
filed.
6.
Enter the IP address and port number of the radius server into the
“Server-IP” and “Server-Port” fields.
7.
Enter the radius key into the “Secret Key” field.
8.
Click “Apply Changes” to finish. You must now set all clients to
match these settings.
Note: Make sure your wireless computers are updated to work with WPA2
and have the correct settings to get proper connection to the Router.
Configuring your Belkin Wireless G
Network Cards to Use Security
Please Note: This section provides information on how to configure
your Belkin Wireless G Network Cards to use security.
At this point, you should already have your Wireless Router or access point set
to use WPA or WEP. In order for you to gain a wireless connection, you will need
to set your wireless notebook card and wireless desktop card to use the same
security settings.
1)
2)
3)
4)
5)
6)
7)
8)