Belkin F5D7632uk4v3000 - Manual (Page 89)

89
Troubleshooting
89
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
Enabling WPA-PSK (no server)
1.
Under Windows XP, click “Start > Control
Panel > Network Connections”.
2.
Right-clicking on the “Wireless Networks” tab will display
the following screen. Ensure the “Use Windows to
configure my wireless network settings” box is checked.
3.
Under the “Wireless Networks” tab, click the “Configure”
button, and you will see the following screen.
4.
For a home or small business user, select “WPA-
PSK” under “Network Administration”.
Note: Select WPA (with radius server) if you are using this
computer to connect to a corporate network that supports
an authentication server such as a radius server. Please
consult your network administrator for further information.
5.
Select “TKIP” or “AES” under “Date Encryption”.
This setting will have to be identical to the wireless
router or access point that you set up.
6.
Type in your encryption key in the “Network Key” box.
Important: Enter your pre-shared key. This can be from eight to
63 characters and can be letters, numbers, or symbols. This
same key must be used on all of the clients that you set up.
7.
Click “OK” to apply settings.